Reasons for shifting standard gears

　　Nowadays, there are more and more machinery and equipment around us, which brings a lot of convenience to our life and work. We all know that the operation of machinery cannot be separated from the help of many internal parts. We usually come into contact with more parts. It is gears. There are many types of gears on the market, and they have a wide range of applications. However, most of the functions of gears are the same. Knowledge is needed because of the different situations where it is used.As a manufacturer of gears, we often need to modify the standard gears. Many people don't understand why. The following editor will explain to you.

　　1) For a pair of meshing standard gears, because the pinion gear has a thin root thickness and more meshing times, it has low strength and is easily damaged, which affects the load-bearing capacity of the gear transmission.

　　2) The standard gear center distance is represented by a. If the center distance A a is actually required, it cannot be installed at all; if A a, it can be installed, but large backlash occurs and the coincidence degree is also reduced, which affects the smoothness of the transmission. Sex.

　　3) If the number of teeth of the standard gear made by hobbing is less than 17, undercutting will occur, which will affect the actual use.

　　Through the above introduction, I believe everyone should understand the reason for the shift of the standard gear, which has an impact on the function of the gear, so you can learn more about the gear when you have time. There is no harm, if you need to buy gears, our company's products are very popular, we welcome you to call and order with us at any time.