Gear normalizing process introduction
source:This site Hangzhou ZHPT Gear Co., Ltd. release time:2020-08-27 17:14:47 Pageviews:746Nowadays, the application of equipment is relatively wide, and the production efficiency of equipment is relatively high, which liberates labor to a large extent. When using equipment, we find that equipment parts and components also play an important role.For gears, it is also an important accessory. The processing of gears has stricter requirements on various processes and higher requirements on manufacturing technology.gearNormalizing is an indispensable means of intentional craftsmanship. I will introduce it to you in the next article.
The purpose of the gear normalizing process is to obtain the hardness suitable for subsequent gear cutting and prepare the organization for heat treatment, so as to reduce the gear heat treatment deformation.The material of gear steel used is usually 20CrMnTi. Generally, normalizing is affected by personnel, equipment and environment, which makes it difficult to control the cooling rate and uniformity of the workpiece, resulting in large differences in hardness and uneven metallographic structure. Affect the effect of metal cutting and heat treatment, making the thermal deformation large and irregular, and the quality of the parts cannot be controlled.To this end, an isothermal normalizing process is adopted.Practice has proved that the use of isothermal normalizing has changed the shortcomings of normal normalizing, and the product quality is stable and reliable.From general normalizing to isothermal normalizing, the processing quality of the workpiece has a higher guarantee, and it also promotes the improvement of equipment performance.
The gear normalizing process is probably the above content, and readers should have already understood it clearly.Gear manufacturersThere are still many processes that need to be adopted when manufacturing gears. If you want to ensure the accuracy of gears, you need to have a strict grasp of each process.This article is here for the first time. If you want to know other knowledge, you are welcome to pay attention to the website or call the hotline directly.
- Things to check before gear operation[2020-12-24]
- Three measuring methods for gears[2020-12-10]
- The nature of the gear involute[2020-11-26]
- Ways to reduce gear transmission noise[2020-11-12]
- Reduction of gear rack transmission gap[2020-10-15]
- Gear failure performance[2020-09-10]