Reasons and solutions of oil pump overload in gear processing
source:This site Hangzhou ZHPT Gear Co., Ltd. release time:2019-04-04 09:39:28 Pageviews:1300Reasons and solutions of oil pump overload in gear processing
The role of gears in the machinery industry is extremely important. Nowadays, many industries in people’s production and life have a very wide range of applications for mechanical equipment. Since gears are the main transmission device of mechanical equipment, their development is naturally also very rapid. The gear processing industry has also made great progress in recent years.During gear processing operations, the oil pump overload phenomenon isGear processingIt will have a very big impact, so how should we solve this problem when we encounter this kind of failure? What causes the oil pump overload phenomenon in gear processing?
Reason: During gear processing, the oil pump overload failure mostly occurs in low-temperature weather conditions such as winter, mostly because the gear box temperature is too low after a long-term shutdown, and the viscosity of the lubricating oil increases. In this case, the load is too large when the oil pump starts. Causes the oil pump motor to overload.
Solution: After the failure occurs, the unit should be in the standby state to gradually heat the gear oil to above 0°C, and then start the oil pump and fan according to the regulations to avoid forcing the wind turbine to start, so as to avoid poor lubrication and damage due to high lubricating oil viscosity Tooth surfaces or bearings and other parts of the lubrication system.
After some introductions in the article on the causes and solutions of the oil pump overload failure of gear processing, do you still have any relevant knowledge about gear processing? Our company is already responsibleGear manufacturingOver the years, the experience in this area is still very rich.However, a lot of relevant knowledge for gear processing needs to be understood by everyone. If you want to know some wonderful information through us, please feel free to get in touch with us.
- Method of repairing gear tooth surface wear[2021-04-15]
- Correct use of gear oil[2020-10-29]
- Introduction to the simple process of gear processing[2020-06-18]
- Gear processing technology introduction[2020-03-12]
- Brief introduction to the problem of gear tooth surface hardness[2019-09-12]
- Understand the standard installation and non-standard installation of standard gears[2019-09-05]